Hi All,
Thank You for respond.Yes I will make 58503A to 58503A comparison but my
problem are I got difficulties found the suitable setting for my SR620 to do it
if any one can give a hint about proper setting for SR620 time interval setup I
will happy to follow it. I like to have 10MHz out comparison and 1PPS
comparison too.my Antena is 30m above ground and according to Lady Heather I my
worst S/N is 35dB all time
Pada Senin, 28 Mei 2018 21.17.25 GMT+7, Bob kb8tq <kb...@n1k.org> menulis:
Hi
If you are seeing 0.3 ppb delta between various HP GPSDO’s the first question
would be “on for how long? / under what conditions?". The HP devices take a
*long* time
to settle in ( like weeks ) to their final best performance loop settings. To
fully settle, they need to be locked the whole time. Staying locked means an
antenna that has a
good satellite view and the unit having a solid survey location. If they are
dropping out of lock from time to time, they will never really settle.
Once settled, you still have a noise process. ADEV is one way to plot this sort
of noise. Your results will still depend on the gate time on your counter(s)
since that impacts
how you “see” the noise. A very short gate will give you more variation than a
longer gate. Put another way, “tau” is part of any frequency measurement, even
if ADEV is
not being calculated.
Bob
> On May 28, 2018, at 8:25 AM, Anton Moehammad via time-nuts
> <time-nuts@febo.com> wrote:
>
> Hi All, I have 5 pcs 58503A with various firmware and 3 of them have 8
> channel recv and 2 have 6 channel receiver all is working but I found none of
> 5 has same result I mean when I compare it with my SR625 use SR620 or my
> CNT-90 use timelab there is a variation in the output.the variation about 3
> E-9 Hz. yes use same cable and same antenna, I also monitor the temp and I
> sure the temp variation is very minimal.any one has explanation about this
> ?Thank YouAnton
>
> | | Virus-free. www.avg.com |
>
> _______________________________________________
> time-nuts mailing list -- time-nuts@febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
