Hi We ran 5335’s in “long gate” mode via the gate open / gate close commands. It worked, but you had to compensate for rollovers. My guess is that you would run into similar stuff on the 5370A. Simple answer is to try it and see … That’s what we did on the 5335 and then worked through all the issues we found.
Bob > On May 30, 2018, at 11:19 PM, Perry Sandeen via time-nuts > <time-nuts@febo.com> wrote: > > List, > I'd like to do 1000 second TIC measurements with my 5370B but I don't want to > have to perchase A HP 1B prologic or similar controller for the timeing. > > As long as I'm interested in the TIC difference but not an absolute value is > it reasonable to use the manual start/stop switches and a stop watch or > similar timer? > Regards, > Perrier > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.