Thanks Gents,
I ran the additional tests recommended by Poul and Magnus and I concur that the
interpolator board is not the likely culprit. I reversed the input cables as
well as the pods in separate experiments to rule out those contributors with no
different results. I thought it may be a trigger circuit error so I fed the
inputs with a locked TTL signal rather than a sine wave using Manual Trigger
with no difference. It seems to be a coarse count error so I'll investigate
the start/stop logic chain.
Adam
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
