Good news -- we had enough orders to justify doing a small production
run of the TNS-BUF isolation amplifiers. We'll be placing the order
with our contract manufacturer this week, and expect delivery in six to
eight weeks.
There will be a few extra boards available, so if you haven't ordered
yet, there's still time.
John
----
On 05/08/2018 03:09 PM, John Ackermann N8UR wrote:
Back in October, 2016, TAPR did a build-to-order offering of the TNS-BUF
low noise, high isolation buffer amplifier. The original 2016 post is
attached below. All of those units sold out, and recently I've had a
few questions about whether more will be available.
TAPR will do another one-off production run if we can get orders for at
least 25 boards (the minimum to make manufacturing viable) by *June 1*.
You can place an order by going to http://tapr.org/kits_tns-buf. The
price will be the same as the previous production -- $119 plus shipping.
If we receive orders for at least 25 boards by June 1, we will charge
credit cards and place the production order with our contract
manufacturer. If we don't get 25 orders, we'll cancel the project and
your card will not be charged.
We expect to ship finished TNS-BUF boards about 60 days after placing
the production order.
Best regards,
John
-------- Forwarded Message --------
Subject: [time-nuts] TNS-BUF High Isolation, Low Noise Buffer Amp Available
Date: Wed, 5 Oct 2016 10:15:46 -0400
From: John Ackermann N8UR <j...@febo.com>
I've previously mentioned a high performance buffer amplifier called the
"TNS-BUF" that I built based on a design by Dr. Bruce Griffiths with
further input from John Miles. Key numbers are:
* Phase noise -140dBc/Hz at 1 Hertz offset, noise floor -175dBc/Hz.
(PN plot attached)
* Reverse isolation greater than 100dB; low enough that I can't make a
trustworthy measurement.
* Gain from -10 to +7 dB from 1 to 30 MHz; maximum output >18dBm.
* Nominal 18VDC operation, but works down to 12V with lowered
maximum output level.
There's information, including performance data and schematic, at
http://www.febo.com/pages/TNS-BUF
There seems to be some interest in an amplifier like this, so TAPR has
decided to do a limited production run. The amp is built with surface
mount parts, so we thought an assembled and tested board was better than
a kit. The price will be $119 each. But we have no idea how much
interest there is, and we need to build a minimum of 25 units to make
production feasible.
So, here's the deal: you can order your TNS-BUF at
http://tapr.org/kits_tns-buf
through *October 20*. If we receive orders for at least 25 boards by
then, we will charge credit cards and place the production order with
our contract manufacturer. If we don't get 25 orders, we'll cancel the
project and credit cards will not be charged. There's no guarantee that
boards will be available for later order.
We expect about 60 days between placing the manufacturing order and
receipt of the boards at TAPR. We'll ship to customers ASAP after
receipt. So that means you can expect to receive your order shortly
after January 1.
So, go to http://tapr.org/kits_tns-buf now to place your order before
the deadline!
John
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.