Nick Been watching the thread and building a replacement for wwvb. Cause darn it I like my spot specific always accurate clocks. However that said the next generations of time users for general life only have one clock and its next to their keister. They are mobile and heavens actually getting to a meeting on time is not as important as finishing that text. I believe our perspective is seriously skewed by time. The fact that the mobile clock is a bit one way or another just isn't much of a factor. Mobile phone time is good enough. There are lots of changes going on such as watching video whenever and however at anytime. So after I figure how to get a bit of 60 KHz energy going around the house, it will be off to making a local wwv replacement. The old radios just don't have a ethernet port on them. Ticks are easy the voice really tough. Regards Paul WB8TSL
On Fri, Sep 7, 2018 at 4:24 PM, Nick Sayer via time-nuts < time-nuts@lists.febo.com> wrote: > My own perspective is that embedded devices with WiFi present a monstrous > user interface barrier. You have to somehow communicate the WiFi SSID and > WPA credentials to the device. Some embedded things have displays and input > methods and can at least use the “ouija board” method (which is still a > pain in the keister), but truly embedded things like wall clocks? There > you’re going to have to rely on ugly hacks like “set up networks” with web > servers running on them and so on. It’s a mess at best. > > Where the embedded device provides value sufficient to overcome the > barriers, then it makes sense. I have a whole bunch of IoT devices in our > house and the added convenience they give made it absolutely worth the > configuration steps asked. But a wall clock? I can imagine the negative > Amazon reviews already. > > Others have argued for GPS clocks. GPS is certainly an alternative to > WWVB, but it has a different set of challenges and benefits. It’s far, far > more accurate, but it’s also more expensive, requires better antenna > placement and requires enough power that a battery operated clock isn’t > terribly practical, certainly compared to WWVB. > > I can *kinda* see the impetus behind shuttering WWVH and perhaps WWV. But > WWVB is currently used by hundreds of thousands if not millions of devices. > I think it’s kind of a rotten deal to just pull the plug on them without at > least a number of years of warning. > > > On Aug 13, 2018, at 5:07 AM, Tim Shoppa <tsho...@gmail.com> wrote: > > > > While consumer WWVB clocks are widespread today, almost all (or all) > professional clock displays have shifted to NTP over copper or over > sometimes WIFI in the past decade. > > > > WWVB or WWV, without an external antenna, was never a good choice for a > clock in a steel building to begin with. 30 years ago you would put an HF > or GOES antenna on the roof. As the paperwork for putting up an antenna has > multiplied exponentially and Ethernet has become completely and totally > ubiquitous in commercial buildings, it becomes a no brainer to choose a POE > NTP clock display. > > > > While NTP works super well for locations with 120VAC or POE power, it is > not so obvious for a wallclock that is traditionally powered by a battery > that only has to be changed every few years. For battery powered wallclocks > in wood buiildings WWVB is still a great solution maybe even the only > solution. But I could imagine a consumer product that just turned on its > WIFI for a minute each day to resync and was battery powered. > > > > Tim N3QE > > > >> On Aug 13, 2018, at 12:28 AM, Richard (Rick) Karlquist < > rich...@karlquist.com> wrote: > >> > >> > >> > >>> On 8/12/2018 6:55 PM, John C. Westmoreland, P.E. wrote: > >>> I hope this does not happen. I get questions from new Hams that ask, > 'How > >>> can I check my antenna easily?' - the quick reply is to check for WWV > on > >>> 2.5, 5,0, 10.0, 15.0 and 20.0 MHz. > >> > >> W1AW is far more useful to check ham antennas, since it broadcasts > >> on ham bands, so that isn't a useful argument. > >> > >> OTOH, the argument that it is OK to obsolete millions of "atomic" > >> clocks because of NTP is also weak. The present WWVB solution > >> is "just right" for the problem; the vast majority of users > >> don't need more accuracy. > >> > >> Rick N6RK > >> > >> _______________________________________________ > >> time-nuts mailing list -- time-nuts@lists.febo.com > >> To unsubscribe, go to http://lists.febo.com/mailman/ > listinfo/time-nuts_lists.febo.com > >> and follow the instructions there. > > > > _______________________________________________ > > time-nuts mailing list -- time-nuts@lists.febo.com > > To unsubscribe, go to http://lists.febo.com/mailman/ > listinfo/time-nuts_lists.febo.com > > and follow the instructions there. > > > _______________________________________________ > time-nuts mailing list -- time-nuts@lists.febo.com > To unsubscribe, go to http://lists.febo.com/mailman/ > listinfo/time-nuts_lists.febo.com > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- time-nuts@lists.febo.com To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.