Hi Everyone I am hoping one of you may be able to help with a specific problem?
Some time ago, I purchased the excellent LeoNTP time server available here:- https://store.uputronics.com/index.php?route=product/product&path=60_70&product_id=92 It serves network time via NTP over Ethernet primarily but it also has PPS/1Mhz/10Mhz via a female BNC connector on the rear. I would like to connect the BNC output to a DB9 Serial input (female) on a machine running FreeBSD (pfSense) to provide PPS reference/accuracy to the NTPD running there. Firstly would this work? Secondly, my dilemma is the pin-out. I believe on the DB9 pin 1 is DCD (the actual pulse) and pin 5 is the ground. Is this correct? Could I use a cable such as this:- http://www.l-com.com/multimedia/eng_drawings/CTL4CAD.pdf even though pin five is not connected or would I need to use something like this:- http://www.l-com.com/multimedia/eng_drawings/CTL5CAD.pdf and make sure the pin 5/plug 5 is grounded in some way? Alternatively, is there a simpler way to achieve the goal? Sorry if this is vague but I would really appreciate some help on this :) Thank-you in advance Anthony New South Wales Australia _______________________________________________ time-nuts mailing list -- time-nuts@lists.febo.com To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.