I'm located in Althorne, Essex (CM3 6DT). I'd like to get a couple of resistors (10 M and 100 M) measured on an 8.5 digit meter, then compare them to what a 34970A data acquisition unit says. I don't want to spend a fortune on very high-end resistors, so bringing the unit to a 3458A, and measuring the resistor on two meters reasonably close in time, should be enough.
There are some issues with these data acquisition meters, which impacts their stability. It does not help the fact that there's no S/N on it, so i don't now if it has any particular fault. -- Dr David Kirkby Ph.D C.Eng MIET Kirkby Microwave Ltd Registered office: Stokes Hall Lodge, Burnham Rd, Althorne, CHELMSFORD, Essex, CM3 6DT, United Kingdom. Registered in England and Wales as company number 08914892 https://www.kirkbymicrowave.co.uk/ Tel 01621-680100 / +44 1621-680100 _______________________________________________ time-nuts mailing list -- time-nuts@lists.febo.com To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.