The 82357B software has a 488.2 compatible mode. It should work. On Sat, Jul 20, 2019 at 1:08 PM Taka Kamiya via time-nuts < time-nuts@lists.febo.com> wrote:
> I am in process of purchasing HP8370. My intent was to use it along with > TIMELAB via GPIB. > > Oddly enough, TIMELAB documentation mentions "National Instruments NI488.2 > compatible GPIB adapters", Prologix GPIB-USB and Prologix GPIB-Ethernet, > but NOT Agilent/HP/82357B. First, I thought GPIB was a standard protocol. > I do not understand why it has to be a couple of specific brand. Has > anyone tried this combination? (TIMELAB & Agilent GPIB) > > My "Agilent" 82357B from eBay is apparently a clone. According to folks > in business, most of 82357B is a clone. > > Secondly, since Prologix GPIB-USB is $149 straight from > http://www.prologix.biz, (is this a right source?) I don't mind buying > it. But am I going to run into similar issues with other software/hardware? > I am entirely new to GPIB. I can use some guidance, please. > --------------------------------------- > (Mr.) Taka Kamiya > KB4EMF / ex JF2DKG > _______________________________________________ > time-nuts mailing list -- time-nuts@lists.febo.com > To unsubscribe, go to > http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- time-nuts@lists.febo.com To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.