On 10/09/2019 17:00, time-nuts-requ...@lists.febo.com wrote: > Re: [time-nuts] 5 Mhz to 10 Mhz and 25 Mhz
Why not just create a comb of frequencies based on the 5 MHz input, then filter and extract the 10 and 25 MHz signals you want, amplify and distribute as needed? Going the PLL route seems like a large hammer to crack a small nut. Unless you want a free-running signal if the incoming 5 MHz vanishes... Dave G0WBX. -- Created on and sent from a Unix like PC running and using free and open source software: _______________________________________________ time-nuts mailing list -- time-nuts@lists.febo.com To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.