I did look at my notes I only have the ocxo version no RB. There is a tap point that delivers 10 MHz. This needs to be buffered and filtered. Both easily done.
Paul WB8TSL On Wed, Sep 18, 2019 at 10:09 AM Bruce Griffiths <bruce.griffi...@xtra.co.nz> wrote: > Dual JK flipflop configured as divide by 3 producing a 33% duty cycle 5MHz > output which is filtered to extract the 10MHz second harmonic component. > > Bruce > > On 18 September 2019 at 21:08 "David C. Partridge" < > david.partri...@perdrix.co.uk> wrote: > > > > > > Having seen the recent discussion of the NB3N502 and other PLLs for > > frequency multiplication. I'm wondering if anyone knows of a similar > > *small* IC that will convert 15MHz to 10MHz ? > > > > Why? My current modifications to the KS24361 output 10Mhz signals > regardless > > of whether the unit has lock. ISTR that the original 15MHz output was > only > > enabled when the unit had lock. I'd like to redo the PCB which I put in > > place of the 15MHz band-pass filter and replace it with one that takes > 15Mhz > > an outputs 10Mhz. > > > > Thanks > > David > > > > > > _______________________________________________ > > time-nuts mailing list -- time-nuts@lists.febo.com > > To unsubscribe, go to > http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com > > and follow the instructions there. > > _______________________________________________ > time-nuts mailing list -- time-nuts@lists.febo.com > To unsubscribe, go to > http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- time-nuts@lists.febo.com To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.
