Time Nutters-- A friend set up a Raspberry Pi (R-Pi) for me to run Lady Heather. It runs 24/7 and is viewed on a small (12" diagonal) monitor sitting on a shelf over my workbench. Living out here in the boon-docks our grid power has frequent interruptions. I am running both the Trimble unit and the Raspberry-Pi on a small UPS back-up pure sinewave power supply.
However, after a prolonged grid power loss interval the LH software re-boots itself and displays the Lady Heather screen there is an issue: It is that when the R-Pi does an automatic re-boot the LH display screen is around 1/4 of the monitor screen's size. No big deal as all I have to do is to drag the lower right corner of the LH display out to the corner of the screen. I have not found how to get LH to reboot itself and have a full size, corner-to-corner display. I have not found anything in the LH manual that corrects the display size on boot-up. Any suggestions will be much appreciated!!! Mike Baker WA4HFR Micanopy, FL USA ****************************** _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.
