Hi John; Amazing product, I did not realize you could use the TADD-1 for 100MHz distribution. I do have a question, as someone who has tested most of the commercially available distribution amps on the market TADD-1's -140dB @ 1Hz is among the very very best best in the industry, (nothing is close for the price) but compared to the very best the noise floor is a bit higher. Is this simply a result of a raw board instead of a shielded enclosure? Thanks;
Tom Knox 303-554-0307 act...@hotmail.com "Peace is not the absence of violence, but the presence of Justice" Both MLK and Albert Einstein ________________________________ From: time-nuts <time-nuts-boun...@lists.febo.com> on behalf of John Ackermann. N8UR <j...@febo.com> Sent: Wednesday, October 23, 2019 11:54 AM To: ew via time-nuts <time-nuts@lists.febo.com> Subject: Re: [time-nuts] 10MHz dist amps FWIW, I designed the TADD-1 to have equal length signal paths for all six channels. 73, John On Oct 23, 2019, 1:01 PM, at 1:01 PM, "Bill Dailey, MD, MSEng, MSMI" <docdai...@gmail.com> wrote: >I am working in a project that requires me to have very similarly >phased >10mhz references (beamforming). > >Previously I just used splitters for 10MHz but now I am graduating to a >distribution amplifier. Looking for suggestions/recommendations and >what I >should consider. Distributing a Fury or a manually set 1111a (May have >the >numbers wrong on this) oscillator. > >1. TADD-1 x 2 >2. 5087A >3. 58502A > >2&3 are from the usual auction site and may have problems now or in the >future. >-- >Doc > >Bill Dailey >KXØO >_______________________________________________ >time-nuts mailing list -- time-nuts@lists.febo.com >To unsubscribe, go to >http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com >and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@lists.febo.com To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@lists.febo.com To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.