Greetings Robert, I have one of these and it works very well running on 6 V. I have been warned off low operating voltage OCXOs by an OCXO manufacturer. This manufacturer would not countenance manufacturing OCXOs operating on 5 V. There is little technical information available, I tried Trimble for info and was told that it was designed for a specific customer and that all the information was customer confidential - if I had paid a contractor a substantial sum to produce a specific design for me, I would not be happy if the manufacturer sent technical details to anyone who enquired! I can therefore understand the policy and it does explain the shortage of technical information.
Regards, Roger T. On Tue, 10 Dec 2019 09:43:23 -0500, Robert DiRosario <ka3...@comcast.net> wrote: > I just received an Trimble 57963-D GPSDO with a Trimble 73090 OCXO. > > There is very little information about this on the web. What voltage > does this run on? > > Some information I found online says 6 volts. The seller says 5.5V. I > got it from ebay / China. > > I did get a breakout board and the 50 pin cable. \ > > Thanks > Robert > > > _______________________________________________ > time-nuts mailing list -- time-nuts@lists.febo.com > To unsubscribe, go to > http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com > and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@lists.febo.com To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.
