Trimble replacement for EOL and WNRO was discussed here on Time-Nuts, five years ago (2015). Heol Designs is the solution. I have the Heol Design N024 GPS receiver in my Datum/Symmetricom/Microsemi TymServe 2100. == Cheap? TSIP drop-in? Relative term ... unless you desire a 19” door stop.
Heol Design N0xx series https://www.heoldesign.com/-Trimble-GPS-replacement-boards- Heol Designs manufactures replacement GPS receivers (upgrade & update using Copernicus II chipset). Used for replacing Trimble iQ, SQ, SK2, LP, ACE II/III GPS receivers (due to EOL and WNRO). Contact Heol about your specific requirements/replacement. https://www.heoldesign.com/IMG/pdf/heol_design_like__series_en.pdf Datum / Symmetricom TS2100 replacement of Trimble Ace III using Heol N024 GPS receiver. Solves more than WNRO. https://www.heoldesign.com/IMG/pdf/heol-tech_note_119_en_r02.pdf greg w9gb == Date: Sat, 11 Jan 2020 20:54:16 -0700 From: Skip Withrow To: time-nuts@lists.febo.com Subject: [time-nuts] Any (relatively) cheap TSIP GPS receivers without WNRO out there? I have an NTP server that uses a Trimble GPS receiver (Accutime 2000, p/n - 39091-00, ROM 3.06) that has fallen prey to WNRO. Just wondering if there are any Trimble (or other brand) receivers that have TSIP serial comms that are available for a reasonable price? Any help appreciated. Skip Withrow _______________________________________________ time-nuts mailing list -- time-nuts@lists.febo.com To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.
