> he said that any HPIB controls would involve some programming which
is impossible to do.
What??? As a software developer for 30+ years I have a major problem
with that!!
I have done HPIB programming before, it's not very hard. What type of
programming was he talking about?
I'm setting up my own "time lab" right now. I just got a HP 5370A and a
HP 5335A.
I already have a 5334A, 5334B and a pair of 5385As, and a NI PCI HPIB
card that I just put in a Linux box.
I plan on using the card to collect data from the counters. Starting
with logging measurements.
I don't know if any of my counters support reading while actively
counting. (Reading and clearing the counter
while the gate is open and it's actively counting.)
Do other "time-nuts" make use of HPIB?
Robert
On 03/04/2020 03:28 PM, Perry Sandeen via time-nuts wrote:
Learned Gentlemen,
While my TN stuff is packed for moving, I took a look at the HP 5335 spec sheet.
It appears that the gate time can be extended up to 10^7 seconds which would be
very useful.
Talking with Bob Camp off list he said that any HPIB controls would involve
some programming which is impossible to do. There is a labview home program for
about $100 but that would also require some programing.
I could make extended gate times by making a 1PPS from my 10MHz reference and
using it for the external gate start and counting it to get my desired stop
time or perhaps there is the possibility of doing an internal mod to the
counter which if it wouldn't be fairly simple, I'd rather not try.
Does anyone know of or have a program that I could put on a laptop (windoz) to
control the gate time function? For several reasons at this time buying
something newer like a HP53131 or equivalent to accomplish this is not feasible.
Thoughts?
Regards,
Perrier
_______________________________________________
time-nuts mailing list -- time-nuts@lists.febo.com
To unsubscribe, go to
http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-nuts@lists.febo.com
To unsubscribe, go to
http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.
