Time-nutters--
I was successful at getting 2 small Mean Well 15 V switching supplies
adjusted down to 12 volts. On these particular models the output voltage
pot was in series with a resistor which limited the output adjustment
range.
Swapping out the series resistor allowed trimming the output voltage down
to 12.0 V.
However, a different model Mean Well switching supply had no resistor in
series with the adjustment pot and I was unable to figure out how to drop
the output voltage down to anything lower than 14.2 VDC.
Mike Baker
WA4HFR
Micanopy, FL
*************
_______________________________________________
time-nuts mailing list -- time-nuts@lists.febo.com
To unsubscribe, go to
http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.
