New guy here needs help using the TAPT TICC and Timelab software
The TICC documentation, I am sure, is sufficient to those in the community, but to someone who has only lurked around the edges, there are a few questions I have. I suspect some are obvious, and some others of no consequence, so here goes: M Measurement Mode T default T S clock Speed (MHz) 10.000000 default 10 C Coarse Clock Rate (us) 100.000000 default 100 P calibration Periods 20 default 20 T Timeout 0x05 default 0x05 Y sync: master / slave M default M E trigger Edge R R default R D time Dilation 2500 2500 default 2500 F Fixed Time2 0 0 default 0 G fudge0 0 0 default 0 (1) In M (Measurement mode), what is the use for the L TimeLab interval mode ? Should it only be used with Timelab? If Yes skip and b: a. In M (Measurement mode), the functions of the T/P/I, modes are reasonably obvious, but with ones should be used with Timelab to compute Allan Deviation. b. Are any of the Measurement modes of particular use in other Timelab functions? (2) In M (Measurement mode), what does one do with D Debug mode? (3) What is the rational for selecting a particular Coarse Clock Rate value? (4) What is the rational for selecting a particular calibration Periods value? (5) What is the rational for selecting a particular Timeout value? (6) What is the rational for selecting a particular time Dilation value? (7) What do the Fixed Time options do, and why? (8) What do the Fudge options do, and why? Lester B Veenstra K1YCM MØYCM W8YCM 6Y6Y <mailto:les...@veenstras.com> les...@veenstras.com 452 Stable Ln (HC84 RFD USPS Mail) Keyser WV 26726 GPS: 39.336826 N 78.982287 W (Google) GPS: 39.33682 N 78.9823741 W (GPSDO) Telephones: Home: +1-304-289-6057 US cell +1-304-790-9192 Jamaica cell: +1-876-456-8898 _______________________________________________ time-nuts mailing list -- time-nuts@lists.febo.com To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.