On Dienstag, 1. September 2020 07:15:34 CEST Richard Katsch wrote: > Hello All, > I have acquired a Quartzlock E10-MRX Rb 10 MHz standard. It appears to lock > and produce a nice sine wave that stays in phase with my Trimble Tbolt for > a time which exceeds my attention span!!! > It does however get hot in operation. As this is my first experience with a > Rb standard I don’t know whether this is normal or indicates that I need a > heat sink. > Any comments would be appreciated.
They're supposed to run hot, but excess temperature will degrade the stability and shorten the lifetime of the electronics. It's hard to recommend what heatsink they require if you have no documentation. Typically you'll need one. My LPRO-101 need a heatsink with < 2K/W of thermal resistance to keep the temperature in check. BR, Matthias > Regards > Richard Katsch > VK2EIK > _______________________________________________ > time-nuts mailing list -- time-nuts@lists.febo.com > To unsubscribe, go to > http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow > the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@lists.febo.com To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.
