Bill,
4194304 Hz = 2^22 Hz so 22 flip-flops gets you down to 1 Hz. The binary
divider is s similar to how the Seiko Beta 21 was designed. See [1] for
an example of a clock that uses this frequency.
What's nice about the Omega Ships Chronometer shown there is that it has
a LEMO 1PPS output so one can make precise measurements of the clock
without opening it and without resorting to audio, optical, vibration,
or magnetic methods. I have one here if you have any questions about
construction, repair, or performance (measured against GPS).
/tvb
[1]
https://en.wikipedia.org/wiki/Omega_Marine_Chronometer#4.19_MHz_Ships_Marine_Chronometer
On 9/11/2020 10:30 AM, Bill S wrote:
A friend has acquired a Chelsea Clock Company Chronoquartz which was
probably made in the 70's. He has measured the oscillator frequency at
approximately 4.194304 MHz. He wanted to know what arrangement of
dividers they used to run the 4 pole stepper motor to step seconds.
Anybody know?
Thanks,
Bill_S
_______________________________________________
time-nuts mailing list -- time-nuts@lists.febo.com
To unsubscribe, go to
http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-nuts@lists.febo.com
To unsubscribe, go to
http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.
