Dana, no plans to buy. Just put up my L1 antenna last weekend. Bob L.
> Sent: Friday, November 13, 2020 at 7:26 PM > From: "Dana Whitlow" <k8yumdoo...@gmail.com> > To: "Discussion of precise time and frequency measurement" > <time-nuts@lists.febo.com> > Subject: Re: [time-nuts] L1/L2 survey antenna $125 new > > I quote the description on the SparKfun page via the WIndows clipboard: > > "Note: This antenna has a TNC Male RP connector found on nearly all > surveying antennas. We recommend a TNC Male RP to SMA adapter > <https://www.amazon.com/DGZZI-2-Pack-Coaxial-Adapter-Connector/dp/B06ZZGGWBS> > or > cable when using with our GNSS receivers." > > But the photo on the site appears to show a receptacle, not a pin, for the > center conductor, hence > a standard female configuration. So unless the thread is left-handed, > which I really can't tell, > this is a standard (not RP)* female* connector. That's my story and I'm > sticking to it! > > Bob, are you by chance thinking of buying one of these? If so, please let > us know which it > is right away when it arrives. > > Dana > > > On Fri, Nov 13, 2020 at 1:34 PM Robert LaJeunesse <lajeune...@mail.com> > wrote: > > > Just spotted this: https://www.sparkfun.com/products/17382 > > > > Datasheet: > > https://cdn.sparkfun.com/assets/6/e/a/9/2/BT-147_GNSS_Antenna_Datasheet.pdf > > > > Chokeplate design, 40dB LNA, TNC connector > > > > _______________________________________________ > > time-nuts mailing list -- time-nuts@lists.febo.com > > To unsubscribe, go to > > http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com > > and follow the instructions there. > > > _______________________________________________ > time-nuts mailing list -- time-nuts@lists.febo.com > To unsubscribe, go to > http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- time-nuts@lists.febo.com To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.