eLORAN has been rock solid over the last 24 hours. In the last test I did
see an occasional "Blink". That would mean you could not trust the signal.
But outside of a odd startup on the SRS FS700 its really stable. Offsets
typically below 1 X10-10 to 10-11 region. Not using a super reference
locally.
Regards
Paul

On Fri, Nov 13, 2020 at 12:35 PM paul swed <paulsw...@gmail.com> wrote:

> Little bits of reports. But its somewhat quite. Granted I also know
> several time-nuts purchase timing receivers from the last test run. So
> maybe interest is picking up a bit.
> The big question is if eLORAN will be a supported PNT reference or not.
> That questions been on the table for about 12 years now as governments
> change and we do nothing.
> Regards
> Paul
>
> On Fri, Nov 13, 2020 at 11:45 AM Magnus Danielson <mag...@rubidium.se>
> wrote:
>
>> Hi Paul,
>>
>> I keep reading these postings with interest.
>>
>> Is there any interaction with users such as yourself on when it runs,
>> "listening reports", etc?
>>
>> Cheers,
>> Magnus
>>
>> On 2020-11-12 21:17, paul swed wrote:
>> > Wildwood, NJ on the air for a brief test period on gri of 8970.
>> >
>> > The transmitter will be on air later today or tomorrow and will run
>> until
>> > next Friday.
>> >
>> > Thats a pretty good run time.
>> >
>> > Regards
>> >
>> > Paul
>> >
>> > WB8TSL
>> > _______________________________________________
>> > time-nuts mailing list -- time-nuts@lists.febo.com
>> > To unsubscribe, go to
>> http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
>> > and follow the instructions there.
>>
>> _______________________________________________
>> time-nuts mailing list -- time-nuts@lists.febo.com
>> To unsubscribe, go to
>> http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
>> and follow the instructions there.
>>
>
_______________________________________________
time-nuts mailing list -- time-nuts@lists.febo.com
To unsubscribe, go to 
http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.

Reply via email to