Dear Claudio, I use TimeLab using either of, the Prologix is often used. Then I post-process with Stable32. I find that TimeLab has a good "lab" usage.
I've used to build some tools specific for the HP5372A, but they have always been very basic or application specific, and is not safe to send out in the wild. Cheers, Magnus On 2021-06-21 21:01, Claudio wrote: > Greetings to all, > thank you Magnus and Bob for the information, I hope there is someone who has > the image copy of the Eprom so I can try to update my HP 5372A I would be > curious to try it with this option! > Regarding the use of Stable32 it is possible to please have some more > information on how to configure the program as long as it acquires data from > the 5372A, I have both a Prologix interface and a N.I. what do you recommend > to use? > Regards > 73 de IZØTYD - Claudio > iz0...@gmail.com > > >> Il giorno 21 giu 2021, alle ore 09:30, time-nuts-requ...@lists.febo.com ha >> scritto: >> >> Send time-nuts mailing list submissions to >> time-nuts@lists.febo.com >> >> To subscribe or unsubscribe via email, send a message with subject or >> body 'help' to >> time-nuts-requ...@lists.febo.com >> >> You can reach the person managing the list at >> time-nuts-ow...@lists.febo.com >> >> When replying, please edit your Subject line so it is more specific >> than "Re: Contents of time-nuts digest..." >> >> Today's Topics: >> >> 1. 2nd Run of TimeHats (Tom Bales) >> 2. HP 5372A opt. 040 FFT (Claudio Mancioppi) >> 3. Re: HP 5372A opt. 040 FFT (Magnus Danielson) >> 4. Re: HP 5372A opt. 040 FFT (Bob L.) >> >> >> ---------------------------------------------------------------------- >> >> Message: 1 >> Date: Sun, 20 Jun 2021 07:15:49 -0400 >> From: Tom Bales <tob.starho...@gmail.com> >> Subject: [time-nuts] 2nd Run of TimeHats >> To: time-nuts@lists.febo.com >> Message-ID: >> <CAH8V6bZ=2h9te_es3656i5n4t7pg89xjubq8cvqf-s6fe89...@mail.gmail.com> >> Content-Type: text/plain; charset="UTF-8" >> >> John, >> I'd like four of the new Timehat boards. If you're going to use bare ublox >> modules, is there a chance of having access points for EXTINT and >> TIMEPULSE? Pads for adding SMA connectors would be very nice. >> >> Tom KE4SYS >> >> ------------------------------ >> >> Message: 2 >> Date: Sun, 20 Jun 2021 10:15:56 +0200 >> From: Claudio Mancioppi <iz0...@gmail.com> >> Subject: [time-nuts] HP 5372A opt. 040 FFT >> To: time-nuts@lists.febo.com >> Message-ID: <5d3c0aa4-8989-475a-b0f2-f90465abc...@gmail.com> >> Content-Type: text/plain; charset=utf-8 >> >> Hello everybody, >> I would like to equip my HP 5372A with option 040, I believe that this >> option is only at the FW level (my version is 2947) but unfortunately for >> what I have searched on the net I have not found any information about it. >> Do any of you have information about it? >> >> Regards >> >> >> '73 de IZØTYD - Claudio >> iz0...@gmail.com >> >> >> >> >> >> >> >> >> ------------------------------ >> >> Message: 3 >> Date: Sun, 20 Jun 2021 21:29:13 +0200 >> From: Magnus Danielson <mag...@rubidium.se> >> Subject: [time-nuts] Re: HP 5372A opt. 040 FFT >> To: time-nuts@lists.febo.com >> Message-ID: <64ffbb86-18ef-8316-4de3-addc2a617...@rubidium.se> >> Content-Type: text/plain; charset=utf-8 >> >> Claudio, >> >> I have a HP5372A with option 040. >> >> I would assume it's just another EPROM on the CPU board and a DIP-switch >> setting to tell it's installed. >> >> I do not recall that I've seen an installation description of it, but it >> should be fairly easy to identify which EPROM it should be. >> >> I currently do not have a working way to read-out EPROMs. I do not >> recall that anyone has provided EPROM images for any of the >> 5371/5372/5373 instruments. >> >> I only very rarely used the FFT option, and today I find that other >> tools provide the functionality better, such as Stable32. >> >> Cheers, >> Magnus >> >>> On 2021-06-20 10:15, Claudio Mancioppi wrote: >>> Hello everybody, >>> I would like to equip my HP 5372A with option 040, I believe that this >>> option is only at the FW level (my version is 2947) but unfortunately for >>> what I have searched on the net I have not found any information about it. >>> Do any of you have information about it? >>> >>> Regards >>> >>> >>> '73 de IZØTYD - Claudio >>> iz0...@gmail.com >>> >>> >>> >>> >>> >>> >>> >>> _______________________________________________ >>> time-nuts mailing list -- time-nuts@lists.febo.com -- To unsubscribe send >>> an email to time-nuts-le...@lists.febo.com >>> To unsubscribe, go to and follow the instructions there. >> ------------------------------ >> >> Message: 4 >> Date: Sun, 20 Jun 2021 11:33:06 -0700 >> From: "Bob L." <bobh...@pacbell.net> >> Subject: [time-nuts] Re: HP 5372A opt. 040 FFT >> To: "'Discussion of precise time and frequency measurement'" >> <time-nuts@lists.febo.com> >> Cc: bobh...@pacbell.net >> Message-ID: <04d301d76602$b6d662b0$24832810$@pacbell.net> >> Content-Type: text/plain; charset="utf-8" >> >> Hi Claudio, >> >> I had a 5372A a while ago. This is from memory and old email. Won't >> guarantee accuracy! >> >> I was given an FFT card with option 040 in ROM. So yes… a firmware option... >> Not an option that you could simply load or enable. >> >> I also remember being instructed to copy down the calibration values from >> the 5372A and to re-load those values if changing out the FFT board... I >> would not want to lose calibration if I ever went back to the non-option 040 >> card. I kept the calibration values saved on paper and stored with my 5372A >> documentation. >> >> There’s a good chance this is correct, but can’t promise… 5372A and all my >> documentation went to a good new home some years ago. >> >> Anyone else have a less fuzzy memory, or better still, does anyone actually >> KNOW? >> >> Best regards, >> Bob >> >> -----Original Message----- >> From: Claudio Mancioppi [mailto:iz0...@gmail.com] >> Sent: Sunday, June 20, 2021 1:16 AM >> To: time-nuts@lists.febo.com >> Subject: [time-nuts] HP 5372A opt. 040 FFT >> >> Hello everybody, >> I would like to equip my HP 5372A with option 040, I believe that this >> option is only at the FW level (my version is 2947) but unfortunately for >> what I have searched on the net I have not found any information about it. >> Do any of you have information about it? >> >> Regards >> >> >> '73 de IZØTYD - Claudio >> iz0...@gmail.com >> >> >> >> >> >> >> >> _______________________________________________ >> time-nuts mailing list -- time-nuts@lists.febo.com -- To unsubscribe send an >> email to time-nuts-le...@lists.febo.com To unsubscribe, go to and follow the >> instructions there. >> >> ------------------------------ >> >> Subject: Digest Footer >> >> _______________________________________________ >> time-nuts mailing list -- time-nuts@lists.febo.com >> To unsubscribe send an email to time-nuts-le...@lists.febo.com >> %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s >> >> ------------------------------ >> >> End of time-nuts Digest, Vol 206, Issue 13 >> ****************************************** > _______________________________________________ > time-nuts mailing list -- time-nuts@lists.febo.com -- To unsubscribe send an > email to time-nuts-le...@lists.febo.com > To unsubscribe, go to and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@lists.febo.com -- To unsubscribe send an email to time-nuts-le...@lists.febo.com To unsubscribe, go to and follow the instructions there.
