I have a couple of Trimble UCCMs. They would not come ready unless pin
39 of the 50 pin ribbon connector is grounded. This selects the 1PPS
sync source. Ground is internal, open is external.
73,
David N1HAC
On 12/24/21 7:39 AM, Wilko Bulte wrote:
hi Francois,
That EEVblog thread discusses (mainly) the UCCM produced by
Symmetricom. If I remember correctly the Symm uses a 12V powered
OCXO, likely with another Vref output. I sold my Symm, the two
Samsung UCCM I have found to be "just working always".
In the meantime I have measured the EFC voltage of the Trimble over a
long period (interval 2 sec). Vref is 2.5V, taken from a LM336.
In more detail
At about 2.5V EFC voltage I measure 10MHz output, plus/minus a couple
of mHz. So using a Vref of 2.5V I do get an EFC voltage in the right
range.
Unfortunately the Trimble never goes GPS locked. LH reports FFOM: Init
and Operation mode: Settling. Reported TFOM is 2. No idea why it does
not lock, the GPS sees ample sats and is in position lock mode.
Ideas welcome!
Wilko
> On 24 Dec 2021, at 12:41, F1CHF <f1...@free.fr> wrote:
>
> error in the Link ?
> is it the good one ?
> tks
>
>
> https://www.eevblog
<https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.eevblog%2F&data=04%7C01%7Cdavid.g.mcgaw%40dartmouth.edu%7C5e368c4bed4442c4c81d08d9c702eb66%7C995b093648d640e5a31ebf689ec9446f%7C0%7C0%7C637759637767230002%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C2000&sdata=wItGRmNR%2F%2BipczR5Fu9sMZftMW6mTl4yXMBN22jBVC4%3D&reserved=0>
>
com/forum/projects/a-look-at-my-symmetricom-gpsdo-(ocxo-furuno-receiver)/msg3
> 78499/#msg3778499
>
> francois
>
>
>
> -------Message original-------
>
> De : Wilko Bulte
> Date : 23/12/2021 20:50:36
> A : Discussion of precise time and frequency measurement
> Sujet : [time-nuts] Re: help reviving Trimble UCCM-LPS GPSDO
>
>
>
>>> On 23 Dec 2021, at 18:58, Attila Kinali <att...@kinali.ch> wrote:
>>>
>>> On Thu, 23 Dec 2021 12:14:48 -0500
>>> Bob kb8tq <kb...@n1k.org> wrote:
>>>
>>> It’s a pretty good bet that the Vref is 5V
>>
>> A quick google lead me to this forum post:
>> https://www.eevblog
<https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.eevblog%2F&data=04%7C01%7Cdavid.g.mcgaw%40dartmouth.edu%7C5e368c4bed4442c4c81d08d9c702eb66%7C995b093648d640e5a31ebf689ec9446f%7C0%7C0%7C637759637767239960%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C2000&sdata=pDHdAlHCUGp%2FKIyE21WtGeBpei0yNt6mP0K3XqTWj04%3D&reserved=0>
>
com/forum/projects/a-look-at-my-symmetricom-gpsdo-(ocxo-furuno-receiver)/1325
>
>>
>> Looks like the Vref is supposed to be 2.5V
>
> For the Symmetricom UCCM or for the Trimble?
>
> These UCCM are form-fit-function compatible but that does not mean the
> circuits are the same. Or the OcXO.
>
> Samsung also produced UCCM, of which I have 2, both working fine. Again
> different circuits, different GPS etc.
>
> Wilko
>>
>> Attila Kinali
>> --
>> The driving force behind research is the question: "Why?"
>> There are things we don't understand and things we always
>> wonder about. And that's why we do research.
>> -- Kobayashi Makoto
>> _______________________________________________
>> time-nuts mailing list -- time-nuts@lists.febo.com -- To
unsubscribe send
> an email to time-nuts-le...@lists.febo.com
>> To unsubscribe, go to and follow the instructions there.
> _______________________________________________
> time-nuts mailing list -- time-nuts@lists.febo.com -- To unsubscribe
send an
> email to time-nuts-le...@lists.febo.com
> To unsubscribe, go to and follow the instructions
there._______________________________________________
> time-nuts mailing list -- time-nuts@lists.febo.com -- To unsubscribe
send an email to time-nuts-le...@lists.febo.com
> To unsubscribe, go to and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-nuts@lists.febo.com -- To unsubscribe
send an email to time-nuts-le...@lists.febo.com
To unsubscribe, go to and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-nuts@lists.febo.com -- To unsubscribe send an
email to time-nuts-le...@lists.febo.com
To unsubscribe, go to and follow the instructions there.