Hi If both signals arrive at the same time, many devices get a bit confused. Many counters run into this same basic issue.
One work around is to “offset” one of the PPS signals. The cable delay feature on the typical GPS module will let you do this over at least a couple microseconds. For many measuring instruments this is adequate to take care of the issue. Bob > On Feb 27, 2022, at 5:56 AM, Erik Kaashoek <e...@kaashoek.com> wrote: > > I'm trying to measure the phase of a 1 second PPS from a cheap GPS module > using a Picotest U6200A > Set up in time/period mode, input 1. Trigger level is set to 1V, DC coupling, > all seems to work well but there is only one measurement every two seconds > which either misses output the in between periods of averages over two > periods. > Does anyone know if it is possible with the U6200A to measure every period of > a PPS? > Erik. > _______________________________________________ > time-nuts mailing list -- time-nuts@lists.febo.com -- To unsubscribe send an > email to time-nuts-le...@lists.febo.com > To unsubscribe, go to and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@lists.febo.com -- To unsubscribe send an email to time-nuts-le...@lists.febo.com To unsubscribe, go to and follow the instructions there.
