On Sat, Apr 22, 2006 at 07:12:09PM +0800, Paolo Alexis Falcone wrote: > I'm having some trouble connecting to the tinc VPN I've setup for my client. > Basically I would like to connect to the LAN of my client (as I'm currently > thousands of miles away and won't be back for a month and a half) to continue > with the development of an in-house ERP. > > I've setup the router (a Linksys router running the stock firmware) to > forward > both TCP and UDP packets port 655 to 192.168.100.248 (which hosts the tinc > daemon). > > Problem now is that when I try to ping the other host (either way) I couldn't > seem to have them see each other.
Let's have a look at your configuration:
> tinc.conf:
> Name=pfalcone
> ConnectTo=erp
> AddressFamily=ipv4
> Mode=switch
> TCPonly=yes
If you use TCPonly=yes, you don't have to forward UDP on your router of course.
> tinc-up:
> #!/bin/sh
> ifconfig $INTERFACE 192.168.100.244 netmask 255.255.0.0
>
> hosts/pfalcone:
> Subnet=192.168.100.244/32
With Mode=switch, Subnet statements are ignored.
> hosts/erp:
> Address=283.870.215.224 (replace with some real IP address of the firewall
> here)
> Subnet=192.168.100.248/32
[...]
Your configuration looks OK, but check your routing table (route -n),
the firewall rules on erp and pfalcone (iptables -L -v -x -n), and the
output of tinc running with the -d5 -D options.
--
Met vriendelijke groet / with kind regards,
Guus Sliepen <[EMAIL PROTECTED]>
signature.asc
Description: Digital signature
_______________________________________________ tinc mailing list [email protected] http://brouwer.uvt.nl/cgi-bin/mailman/listinfo/tinc
