Hello, I've been trying to get bridging working on os x for about a week and haven't been able to do it. I've exhausted the examples and google and just can't get it to work. Any help would be appreciated, as I'm about to give up :( The goal is to join our two 192.168.1.x networks and share a large 192.168.1.x network between the two of us.
Our setup is as follows: Networks A and B both have their internal range set to 192.168.1.x and there are no conflicting ip addresses between the two networks. Running os x on both networks as the tinc machines. (files edited for readability) tinc.conf (networkA) Name = networkA Device = /dev/tap0 Mode = switch PrivateKeyFile = /usr/local/etc/tinc/vpn/rsa_key.priv ConnectTo = networkB tinc.conf (networkB) Name = networkB Device = /dev/tap0 Mode = switch PrivateKeyFile = /usr/local/etc/tinc/vpn/rsa_key.priv tinc-up (networkA) #!/bin/sh ifconfig $INTERFACE 192.168.1.253 netmask 255.255.255.0 tinc-up (networkB) #!/bin/sh ifconfig $INTERFACE 192.168.1.252 netmask 255.255.255.0 The 253 and 252 ip addresses are unused, we just picked them out of a hat so to speak. I'm not sure if that's the right way to select those ips or not. hosts/networkA Address = networkA outside ip address -----BEGIN RSA PUBLIC KEY----- hosts/networkB Address = networkB outside ip address -----BEGIN RSA PUBLIC KEY----- With this setup we can connect without any errors, but I can't ping any of his machines nor can he ping any of mine. We get the host not found or no route to host error when trying to ping. Help! Please! Dave _______________________________________________ tinc mailing list [email protected] http://www.tinc-vpn.org/cgi-bin/mailman/listinfo/tinc
