That device uses the Atheros AR2317 processor which isn't exactly robust at 180Mhz.
Have you considered alternative hardware? On Mon, Sep 20, 2010 at 10:37 AM, Clemens John <[email protected]> wrote: > Hi, > > we are using Tinc in our Freifunk Network in Oldenburg for internode > connections over the internet. So Tinc is running on OpenWrt 10.03 on Dlink > Dir-300 Routers. > We all have enough internet bandwith (1,6 MB/sec and more) but we only get > a > maximum speed of ~350KB/sec between two tinc nodes because then tinc uses > 99% > of the cpu. > > Is it possible to get more Speed with tinc on this machines? I think we > have > compression and encryption already turned off so what is using the cpu? > > Our Tinc configuration looks like this: > --------- > Name = 0014224074A7 > Mode = Switch > Port = 655 > #PingTimeout = 30 > Hostnames=yes > PMTUDiscovery=yes > Cipher = none > Compress = 0 > Digest = none > IndirectData = yes > ConnectTo=0021912CF309 > ConnectTo=00240117B755 > ConnectTo=batgw > ConnectTo=0022B0967CD7 > ConnectTo=0014224074A7 > ---------- > > If there is no way to get more speed, do you know another VPN-Solution > which > is better concerning speed? We dont need security because the network is > completely open, but we need speed. > > Thank you > Clemens > > _______________________________________________ > tinc mailing list > [email protected] > http://www.tinc-vpn.org/cgi-bin/mailman/listinfo/tinc > >
_______________________________________________ tinc mailing list [email protected] http://www.tinc-vpn.org/cgi-bin/mailman/listinfo/tinc
