Hi, I upgraded some of my Tinc nodes from 1.0.8 recently and found something strange.
All of a sudden, the vpn would not work as a full-mesh. Certain nodes were not contactable. I re-generated my rsa-keys, and checked my configuration. My vpn uses the following in tinc.conf, as I am routing both ipv4 and v6. === name = node1 mode = switch AddressFamily = any PMTU = 1280 PMTUDiscovery = yes TCPonly = no ConnectTo = hub1 ConnectTo = hub2 ConnectTo = hub3 === My VPN has some hosts called by nodex. These nodes are dynamic-ip, and set to contact (connectTo) the hubs when they bring up their tincd. The hubx nodes are fixed-ip, and are connected to each other in a full mesh. With TCPonly = no, the vpn would only connect to ONE of the hubs, and traffic would not be routed to any other host on the vpn. In order to get full mesh functionality back, I have had to set TCPonly to yes, on all nodes. Hope this helps someone Graeme _______________________________________________ tinc mailing list [email protected] http://www.tinc-vpn.org/cgi-bin/mailman/listinfo/tinc
