Should I change to this in order to avoid the issue? 0 * * * * echo Subnet = 54.169.128.0/17 >> /etc/tinc/myvpn/hosts/aws_sgp 0 * * * * echo Subnet = 54.169.0.0/17 >> /etc/tinc/myvpn/hosts/aws_sgp 1 * * * * /usr/sbin/tincd -n myvpn -k 2 * * * * /usr/sbin/tincd -n myvpn --debug=3
30 * * * * sed -i '/54.169.128.0\/17/d' /etc/tinc/myvpn/hosts/aws_sgp 30 * * * * sed -i '/54.169.0.0\/17/d' /etc/tinc/myvpn/hosts/aws_sgp 31 * * * * /usr/sbin/tincd -n myvpn -k 32 * * * * /usr/sbin/tincd -n myvpn --debug=3 > On 26 May 2017, at 9:30 AM, Bright Zhao <[email protected]> wrote: > > Hi, All > > Due to some routing rotation purpose, I use crontab to add below info: > > 0 * * * * echo Subnet = 54.169.128.0/17 >> /etc/tinc/myvpn/hosts/aws_sgp > 0 * * * * echo Subnet = 54.169.0.0/17 >> /etc/tinc/myvpn/hosts/aws_sgp > 1 * * * * /usr/sbin/tincd -n myvpn -k > 1 * * * * /usr/sbin/tincd -n myvpn --debug=3 > > 30 * * * * sed -i '/54.169.128.0\/17/d' /etc/tinc/myvpn/hosts/aws_sgp > 30 * * * * sed -i '/54.169.0.0\/17/d' /etc/tinc/myvpn/hosts/aws_sgp > 31 * * * * /usr/sbin/tincd -n myvpn -k > 31 * * * * /usr/sbin/tincd -n myvpn --debug=3 > > > But after it get runs, the tinc log shows everything fine, but some how it > get below error message, is it an accidental error, or is there anything > wrong? > > Can't write to Linux tun/tap device (tun mode) /dev/net/tun: Input/output > error > > > _______________________________________________ tinc mailing list [email protected] https://www.tinc-vpn.org/cgi-bin/mailman/listinfo/tinc
