wiring directly using a level converter should work fine,
but where to put the converter? an extra board? (actually
you might get away with some sleazy direct line power scheme,
look online for power from rs232).
Also look at the MIB510 schematic.
MS
Alfredo Quesada wrote:
Hi
I'm looking for information about Mica motes, because
we are interested in connecting a Mica mote directly
to a PC.
Taking a look at its schematics we've seen the 51-pin
connector, which has the USART pins. When going to
receive TOS_Msg from the mote (send to TOS_UART_ADDR)
is there enough with wiring RX/TX lines from the UART
directly to a PC serial comm? (well, using an
intermediate device in order to convert mote's voltage
to PC serial voltage).
We only need to receive packets from the mote.. we're
not currently interested in sending packets to the
mote (but if it worked I think we would have no
problem for sending them too).
Thx in advance
Regards
__________________________________________________
Correo Yahoo!
Espacio para todos tus mensajes, antivirus y antispam ¡gratis!
Regístrate ya - http://correo.espanol.yahoo.com/
_______________________________________________
Tinyos-help mailing list
Tinyos-help@Millennium.Berkeley.EDU
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
_______________________________________________
Tinyos-help mailing list
Tinyos-help@Millennium.Berkeley.EDU
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
