search back a few days in the list. Someone came up
with a fix...I haven't tried it yet though.
Basically you need to use /dev/ttyS5 instead of COM6
and put it in the makefile.
YMMV if you are using a USB->Surreal converter.
My solution was to back out the cygwin upgrade
that goes with >1.1.10...
MS
[EMAIL PROTECTED] wrote:
Hey all,
Sorry for all the emails. JUst having much trouble.
After upgrading from TinyOS-1.1.0 to TinyOS-1.1.15
I run "make mica2" to compile the BLink application, and that goes well.
I then run
"make mica2 reinstall mib510,com6"
(i am using a usb-serial converter, which i know works)
BUt the uisp hangs when i try to upload :
installing mica2 binary using mib510
uisp -dprog=mib510 -dserial=com6 --wr_fuse_h=0xd8 -dpart=ATmega128
--wr_fuse_e=f
f --erase --upload if=build/mica2/main.srec.out
What can I do?? thank you
JOsh
-------------------------------------------------
This mail sent through IMP: http://horde.org/imp/
_______________________________________________
Tinyos-help mailing list
[email protected]
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
_______________________________________________
Tinyos-help mailing list
[email protected]
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
