Here is what I do on my WindowsXP machine running cygwin.... I have the board plugged into com1:




TinyDB- Compiling and installing TinyDB on each mote



cd /opt/tinyos-1.x/apps/TinyDBApp

make mica2 install.0 mib510,/dev/ttyS0 Compiles custom version of TinyDB for node0

and installs the firmware onto the mote



----- Original Message ----- From: "Tehn Yit Chin" <[EMAIL PROTECTED]>
To: "zhiqiang zhang" <[EMAIL PROTECTED]>
Cc: <tinyos-help@Millennium.Berkeley.EDU>
Sent: Sunday, July 02, 2006 9:54 PM
Subject: Re: [Tinyos-help] error "Direct Parallel Access not defined"


Sorry, I thought you were on linux. On cygwin, just replace /dev/ttyS0 with the name of your comport, which might be com1.

On my cygwin setup, all i do is the following the results...

$ make mica2 reinstall.0 MIB510=com1
    installing mica2 binary
set-mote-id build/mica2/main.srec build/mica2/main.srec.0.out `echo reinstall.0 |perl -pe 's/^reinstall.//; $_=hex if /^0x/i;'` uisp -dprog=mib510 -dserial=com1 -dpart=ATmega128 --wr_fuse_e=ff --erase --upload if=build/mica2/main.srec.0.out
Firmware Version: 2.1
Atmel AVR ATmega128 is found.
Uploading: flash

Fuse Extended Byte set to 0xff


cheers,
Tehn Yit Chin
Embedded System Engineer, Grey Innovation Pty. Ltd.


zhiqiang zhang wrote:
hi guys:

  I attached the command and message below :

*$ make micaz reinstall.0 MIB510=/dev/ttyS0*
*
set-mote-id build/micaz/main.srec build/micaz/main.srec.out-0 0
Could not find symbol TOS_LOCAL_ADDRESS in build/micaz/main.exe, ignoring
symbol.
installing micaz binary with dapa

isp -dprog=dapa --wr_fuse_h=0xd9 -dpart=ATmega128 --wr_fuse_e=ff  --erase
/dev/parport0: No such file or directory
Failed to open ppdev.
make: *** [program] Error 2*
**
i am using serial port,but it seems like using parallel port .i don't know
how to solve this problem.

By thy way ,you said there should be a symbol link between /dev/ttyS0 and
/dev/parport0 ,how to do this? because i even can't find /dev ( i am using
cygwin).

regards
zhiqiang

**
*

*

On 03/07/06, Tehn Yit Chin <[EMAIL PROTECTED]> wrote:


There probably isn't a /dev/parport0 available? Why are you using the
parallel port? Is there  symbolic link between /dev/ttyS0 and
/dev/parport0?

What happens when you try

make mica2 reninstall.1 mib510=/dev/ttyS0



Tehn Yit Chin
Embedded System Engineer, Grey Innovation Pty. Ltd.


zhiqiang zhang wrote:
> hi,guys:
>
>     I met the same question with campbell gao.
>
>    Now i try the command  make mica2  reinstall,1
mib510,/dev/ttyS0,then  i
> met another error. */dev/parport0:no such file or directory , Failed > to
> open
> ppdev.*
>   Do you know how to solve it ?
>
> zhiqiang
> *
> *
> On 03/07/06, Tehn Yit Chin <[EMAIL PROTECTED]> wrote:
>
>>
>> campbell gao wrote:
>> > hi all
>> > when i type "make mica2 reinstall,1 mib510,COM1" or   "make mica2
>> > reinstall,1 mib510,/dev/ttyS0"
>> > I get the error "Direct Parallel Access not defined".
>> >
>> > why ,anyone know it ??
>> >
>>
>> I believe that the syntax is
>>
>> make mica2 reinstall.0 MIB510=COM1
>>
>> or
>>
>> make mica2 reinstall.0 MIB510=/dev/ttyS0
>>
>> Don't use any commas.
>>
>> Tehn Yit Chin
>> Embedded System Engineer, Grey Innovation Pty. Ltd.
>>
>> _______________________________________________
>> Tinyos-help mailing list
>> Tinyos-help@Millennium.Berkeley.EDU
>>
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
>>
>




_______________________________________________
Tinyos-help mailing list
Tinyos-help@Millennium.Berkeley.EDU
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help


_______________________________________________
Tinyos-help mailing list
Tinyos-help@Millennium.Berkeley.EDU
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help

Reply via email to