Hi,
I have the following setup
node2 <--> node1 --> base
| ^
+--------------------+
node2 and node1 has the surge application installed.
base has the TOSBase installed.
No matter what I try, I can't seem to get a packet to multihop from
node2 to node1 to base. All the packets appears to single hop to the base.
A couple of questions.
1) Does the base node needs to transmit for node1 to work out one of its
neighbours is node 0? One of things I tried is to install surge into
base node but this does not appears to be cause the packet to multihop.
2) Will the packet multihop with only two nodes in the network?
3) Is there a power up sequence? ie base node first, and then node 1 and
the node 2?
4) What are the conditions that will cause a packet to multihop?
Any suggestion is appreciated.
--
Tehn Yit Chin
Embedded System Engineer, Grey Innovation Pty. Ltd.
_______________________________________________
Tinyos-help mailing list
Tinyos-help@Millennium.Berkeley.EDU
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
