As I said, based on my (small) experience with micaz I believe
that 100 messages per second is about the max you can expect.
And that 100 is for the total system, not per mote (unless of
course you have only one mote transmitting). If you are doing
multihop then you need to divide the total messages by the
number of hops (each hop being it's own message) to get even
a best case estimate -- ignoring hidden nodes and any other
actual practical considerations.
So the only way I see to get your higher sample rate is to
aggregate samples, say 10 per message. You would need to
do some testing in various configurations to see how many
messages you can get...let's say, the source and two hops gives
you best case 30 msg/sec, with 10 samples/msg, is 300 samples/sec.
Nobody said that motes were a High Speed sensor network...
MS
siva prasad wrote:
thanks for ur reply michael,
if i sample the signal at 1ms(suppose for 50hz signal) then it will be
better ...that is required for my application ...one more thing is that,
the system tht i want to monitor is highly dynamic in nature..so the
data should be send for every 1ms...i think 1ms is sufficient for just
measuring the external ADC value..and sending this value using
multihop(must) technique...
But the problem is..... i am losing lot of packets abt 50% even for the
sampling period at 10 ms....do u hav any different idea tht ...how can i
overcome this problem....
any help should be highly appreciated...
if we cant sample and send(using multihop) the data in 1ms ...pls give
the reason...
still i did nt clear my old doubts...
On 8/30/06, *Michael Schippling* <[EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]>> wrote:
I don't know the message rate you can expect from moteiv motes
but if you are trying to send one sample every 10ms you are
probably pretty close to the limit (somewhere on the order of
100 msg/sec is the max for micaz's). You'll probably need to
collect multiple samples in one message to get anywhere at 30Hz...
Let me know if you need clarification one answers to your other
questions.
MS
siva prasad wrote:
>
>
> From: *siva prasad* <[EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]> <mailto:[EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]>>>
> Date: Aug 28, 2006 12:52 AM
> Subject: Delta application -help required
> To: tinyos-help@millennium.berkeley.edu
<mailto:tinyos-help@millennium.berkeley.edu>
> <mailto: tinyos-help@millennium.berkeley.edu
<mailto:tinyos-help@millennium.berkeley.edu>>
>
> hi all...
>
> i am working on sampling the ADC value instead of
DEmosensorc...in the
> delta application provided by moteiv.....
>
> i am glad to say tht ..i hav successfully compiled it ...
> and installed..it worked...
> the problem is when i tried to undrstand the program..i am facing
some
> difficulties....
>
> -> i could nt understand the task..named...sendDone( )
>
> -> while i tried to see the raw data using listen tool...it is
showing
> 42 bytes...but i could nt figured out the data format..
>
> ->one more problem is...the signal tht i want to sample is a low
> frequency signal..abt 30Hz...
> if i increase the sampling time to 10ms ..i am losing lots of
packets...
>
> can any body pls help me...
>
> thanks
>
> siva katru
>
>
>
------------------------------------------------------------------------
>
> _______________________________________________
> Tinyos-help mailing list
> Tinyos-help@Millennium.Berkeley.EDU
<mailto:Tinyos-help@Millennium.Berkeley.EDU>
>
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
_______________________________________________
Tinyos-help mailing list
Tinyos-help@Millennium.Berkeley.EDU
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
