It's working again. Of it's own volition. all it took was a couple or two
restarts of the PC.
Sankar.
On Tue, 14 Nov 2006 20:10:20 -0600, Sankar Gorthi
<[EMAIL PROTECTED]> wrote:
Hi,
I am working with the Cricket MTS450CA boards.
I was programming the motes to initialize a status array - code below:
for (i=0; i<= NUM_MOTES; i++) {
for (j=0; j<=255; j++) {
msgRcvd[j][i] = FALSE;
}
SeqNo[i] = 0;
}
and placed this code at the end of the StdControl.init() method.
After programming the motes, the LEDs are now constantly on and the
programmer refuses to respond:
-------------
set-mote-id build/cricket/main.srec build/cricket/main.srec.out `echo
reinstall.
8 |perl -pe 's/^reinstall.//; $_=hex if /^0x/i;'`
uisp -dprog=mib510 -dserial=/dev/ttyS3 -dpart=ATmega128 --wr_fuse_e=ff
--erase
Programmer is not responding.
make[1]: *** [reinstall.8] Error 2
make[1]: Leaving directory `/opt/Cricket/tos/apps/Cricket7'
make: *** [install.8] Error 2
-------------
i've tried installing different code on another cricket mote and the
programmer and the serial port work fine, but the cricket which was
programmed with the code above does not respond.
Is there a way to erase the flash from this locked out state? Is there
anyway I can reprogram the cricket?
Please help,
Sankar.
--
No opera plot can be sensible, for people do not sing when they are
feeling sensible. - W. H. Auden
_______________________________________________
Tinyos-help mailing list
[email protected]
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
