What method/interface are you using to vary the RF TX
power? And what values are you using? The CC2420 2.x
stack will accept anything between 1 and 31.
-David
On Wed, 15 Nov 2006 12:55:40 -0700
[EMAIL PROTECTED] wrote:
I am a currently using the latest dev distribution of
TinyOS-2.x and TelosB
motes. I am trying to obtain a power consumption model
for the TelosB motes,
right now specifically the power consumption of the
CC2420 radio. My nesC
application I wrote transmits a packet periodically and
I am varying the RF
transmit power. According the the specs when the the RF
transmit power is
varied there should be a varying current draw. But when
I measure current draw
I am not able to observe this varying current draw. For
my setup, I have placed
a 10 ohm resistor in series with the battery pack and
telosb mote and I am using
an Oscilloscope. Any suggestions would be greatly
appreciated. Thank you.
_______________________________________________
Tinyos-help mailing list
[email protected]
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
_______________________________________________
Tinyos-help mailing list
[email protected]
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
