Try opening a web browser and type the IP address. You should see
Lantronix web manager page.

>From the left hand menu corner, click on Channel 1 and see what do you
see as Port number and baud rate. The correct settings should be:
        Serial Port Speed 115200
        Port 10001

>From the left hand menu corner, click on Channel 2 and see what do you
see as Port number and baud rate. The correct settings should be:
        Serial Port Speed 57600
        Port 10002

If you make changes in Steps 4 and 5, save the settings. Try programming
the Mote now and see if the problem goes away. 

Regards,
Giri

-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Libor
Roubal
Sent: Tuesday, November 28, 2006 12:27 PM
To: [email protected]
Subject: [Tinyos-help] MIB600 not responding, PING and web ok

Hello all,
I know this problem was already solved here before, but I cannot find
working solution anyway...

Whenever I try to load an application into Mote placed on MIB600, or
just to read the fuses, I am getting
message: "Programmer is not responding". However, it responds to pings
and also I can configure it through the web interface. The output looks
like this:

$ make micaz install eprb,10.10.10.31
...
...
   compiled Blink to build/micaz/main.exe
           1658 bytes in ROM
             48 bytes in RAM
avr-objcopy --output-target=srec build/micaz/main.exe
build/micaz/main.srec avr-objcopy --output-target=ihex
build/micaz/main.exe build/micaz/main.ihex
   writing TOS image
cp build/micaz/main.srec build/micaz/main.srec.out
   installing micaz binary using eprb
uisp -dprog=stk500 -dhost=10.10.10.31 --wr_fuse_h=0xd8 -dpart=ATmega128
--wr_fus e_e=ff  --erase --upload if=build/micaz/main.srec.out
Programmer is not responding.: 10.10.10.31
make: *** [program] Error 2

I have been searching through the mail-archives on tinyos.net, but I
cannot find solution for this problem.
I have sufficient power going to programmer, MICAz is properly seated in
the connector and also I have tried changing the motes.

Any help would be greatly appreciated.

BR,

Libor

_______________________________________________
Tinyos-help mailing list
[email protected]
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-hel
p

_______________________________________________
Tinyos-help mailing list
[email protected]
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help

Reply via email to