Hi Keerthi,
The interfaces that you're using do not exist. If you look at the
nesdoc for the MicDriverC component, you will see:
interface SensorInterrupt as MicInterrupt;
interface Potentiometer as MicInterruptThreshold;
Your application should mirror these lines in its "uses" block.
-Joe
On 3/13/07, Keerthi Iyengar <[EMAIL PROTECTED]> wrote:
Hello,
I was wondering if you had any ideas on it. Can't implement MicInterrupt
on the tmoteinvent.
Regards
Keerthi
Keerthi Iyengar wrote:
> Hey guys,
>
> I had previously asked about MicInterrupts,
>
> I am relatively new to NesC and tinyos programming. I am using the
> tmote invent and I am compiling using "make tmoteinvent"
>
> In my configuration, I have wired
>
> rcP.MicInterrupt -> MicDriverC; //rcP is my implementation in my
> program
>
> From the file MicDriverM file in
> C:\cygwin\opt\moteiv\tos\sensorboards\invent , you need to implement
> async event void MicInterrupt.fired() {
> }
>
> However when i compile it is saying "'fired' is not in interface
> 'MicInterrupt'
>
> Instead it asks me for 'MicInterrupt.toneDetected' which is something
> to do with the mica platform from what I have seen. The exact error is:
>
> In file included from rcC.nc:8:
> In component `rcP':
> rcP.nc:6: interface MicInterruptThreshold not found
> rcP.nc:6: interface MicInterruptThreshold not found
> In file included from rcC.nc:8:
> rcP.nc:36: `fired' is not in interface `MicInterrupt'
> rcP.nc:40: `setDone' is not in interface `MicInterruptThreshold'
> rcP.nc:13: `MicInterrupt.toneDetected' not implemented
>
> Can someone help me out? I can't see anything wrong with my code.
>
> Regards
>
> Keerthi
>
> ------------------------------------------------------------------------
>
>
> configuration rcC {
> }
> implementation {
>
> components Main;
> components new MainControlC() as MainMicC;
> components rcP;
> components DelugeC;
>
> components MicDriverC;
>
> components UserButtonAdvancedC;
> components LedsC;
> components new TimerMilliC() as LedsTimerC;
>
> Main.StdControl -> rcP;
> MainMicC.SplitControl -> MicDriverC;
>
> rcP.MicInterrupt -> MicDriverC;
> rcP.MicInterruptThreshold ->MicDriverC;
>
> rcP.Button -> UserButtonAdvancedC;
> rcP.Leds -> LedsC;
> rcP.LedsTimer -> LedsTimerC;
>
> }
>
>
>
> ------------------------------------------------------------------------
>
>
> module rcP{
> provides interface StdControl;
>
> uses interface MicInterrupt;
> uses interface MicInterruptThreshold;
>
> uses interface ButtonAdvanced as Button;
> uses interface Leds;
> uses interface Timer2<TMilli> as LedsTimer;
>
> }
> implementation {
>
>
> // StdControl
>
> command result_t StdControl.init() {
> return SUCCESS;
> }
>
> command result_t StdControl.start() {
> call Button.enable();
> return SUCCESS;
> }
>
>
> command result_t StdControl.stop() {
> return SUCCESS;
> }
>
>
> event void LedsTimer.fired() {
> }
>
> async event void MicInterrupt.fired() {
>
> }
>
> event void MicInterruptThreshold.setDone(uint8_t _gain, result_t
> _result) {
> }
>
>
>
>
>
>
> // Button clicking
>
> async event void Button.multiClick( uint8_t count ) {
> }
> async event void Button.longClick( uint32_t time ) {
> }
> }
>
>
>
>
>
>
_______________________________________________
Tinyos-help mailing list
Tinyos-help@Millennium.Berkeley.EDU
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
_______________________________________________
Tinyos-help mailing list
Tinyos-help@Millennium.Berkeley.EDU
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
