Dear Mr Alessandro Balvis,
I would like to ask you, if it is possible, to provide me with more
information on how you achieved to collect data with MDA300 with 1000Hz
sampling frequency?
What variables have you actually modified and at what value have you set
them?
We try to increase the sampling frequency but we can only get data at around
150Hz.
In particular, I have set in SamplerM.nc:
TIME_SCALE =1
MAX_SAMPLERECORDS = 1 (I collect only the reading from ADC0)
In my program I have set:
Timer_rate = 3;
ANALOG_SAMPLING_TIME 2
(Note that these are the smallest values with which I can collect packets)
Also, I fill a packet of 26 samples and then send them
( Do you know a way to increase the number of samples in a packet?.
I have changed the message length but when I increase the samples to 27 I
cannot get packets at the base.)
Any help would be really appreciable.
Thanks a lot in advance
My Best Regards
MM
-----------------------------------------------------
Mr Marios Milis
Project Manager, SignalGeneriX Ltd
Maximos Court, Block B
3rd Floor
Leontiou A
P.O.Box 51341
3504 Limassol
Cyprus
Telephone: +357 25870072
Fax: +357 25870076
Email: <mailto:[EMAIL PROTECTED]>
[EMAIL PROTECTED]
<http://www.signalgenerix.com/> www.signalgenerix.com
-----------------------------------------------------
This message and any files transmitted with this email are legally
privileged and intended for the sole use of the individual(s) to whom they
are addressed. Access to this e-mail by anyone else is unauthorised, and any
disclosure, copying, distribution or other use of this e-mail is prohibited
and may be unlawful. We will not under any circumstances have any
responsibility or liability arising out of or in connection with any
unauthorised use of this e-mail. Please notify the sender if you have
received this in error.
_______________________________________________
Tinyos-help mailing list
[email protected]
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
