This is the link. http://www.moteiv.com/community/Change_the_default_UART_baud_rate
On 4/19/2007, "Michael Schippling" <[EMAIL PROTECTED]> wrote: >If the destination is the pc you may be limited by the serial port speed. >There are some instructions for changing that speed, someplace... >I probably have a link, but searching the list might find it. > >In my testing at: http://www.etantdonnes.com/Motes/report_micaz/ >I may have made that same mistake, and got about the same results as you. > >MS > > >Jeong Kwanhee wrote: >> Hello all, >> >> >> >> Currently, I�m testing performance using micaz. >> >> I�m doing using surge program and I manipulated data size, pps(packet >> per sec). >> >> I sent 190kbps from source to destination(1hop), but I gained only >> 57kbps to destination. >> >> I don�t know why this happening is. I think micaz hardward specification >> is appeared 250kbps. >> >> >> >> What am I doing about this happening?? >> >> Anybody help me. >> >> >> ------------------------------------------------------------------------ >> >> _______________________________________________ >> Tinyos-help mailing list >> [email protected] >> https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help >_______________________________________________ >Tinyos-help mailing list >[email protected] >https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help _______________________________________________ Tinyos-help mailing list [email protected] https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
