Dear Giri,
Thanks a lot for your reply.
I have few doubts about the XSensorMTS400 application, it functionally captures
data from various pressure, temp,humidity,light sensors nd sends the data
serially to Mica2 mote. For my application i have to connect a NEC
microcontroller with the mica2 . This NEC microcontroller captures data from
some external sensors which is
digital and sends it to the mica2 mote over a serial connection. What
parameters do i need to take care of . Do i need to extract the data from the
serial packet sent from
NEC and then packet it in mica2 for sending the same over RF?
Apart from the baud rate compatibilty of the mica2 and the NEC microcontroller.
What are the other parameters to make communication possible. Can i use The
existing
GpsPacket and other configurations inside XSensorMTS400.? What kind of changes
need to be done..
Please help me, it would be really thankful of you,
With Regards,
Dipti Jaiswal
----- Original Message -----
From: Giri Baleri
To: Dipti
Cc: tinyos forum
Sent: 2007 Apr 26 9:13 PM
Subject: RE: [Tinyos-help] Fw: serial data reception on a mica2 mote
fromanother microcontroller
Dipti,
The XSensorMTS400 application (found under /contrib/xbow/apps) has an
interface to external UART serial device (GPS module). It also has example
implementation of interface to external I2C serial device (Humidity/Temp
sensor).
http://tinyos.cvs.sourceforge.net/tinyos/tinyos-1.x/contrib/xbow/apps/XSensorMTS400/
This might be a good starting point for your application.
Giri
------------------------------------------------------------------------------
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dipti
Sent: Thursday, April 26, 2007 1:51 AM
To: tinyos forum
Subject: [Tinyos-help] Fw: serial data reception on a mica2 mote fromanother
microcontroller
Hi all,
I need to design an application wherein a mica2 mote .. say mote 1 receives
data serially from another microcontroller and forwards it on the Rf. I needed
some guidance as to how can this communication be established. How will i use
the clock and other interfaces to suit serial communication in this scenario.?
Please help,
Thanks in advance.
Dipti Jaiswal
_______________________________________________
Tinyos-help mailing list
[email protected]
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
