On Jun 2, 2007, at 2:51 AM, Peizhao Hu wrote:
Hi, All,
I just received a mote kit from my supervisor she bought in year 2003.
I have setup TinyOS 2.X on my ubuntu machine. And I tested it will
the Blink application without any problem.
However, when I got to Lesson 3 that require one of the mote to
receive packet from over the radio. It didn't do anything.
I confirmed it triggered the AMSend.send command with
call Leds.led0Toggle();
just after the send command. and it does blink.
but the toggling of Led1 in my receive never occurs.
I also tested it with the RadioCountToLeds example, which came with
TinyOS 2.x package, but it is the same, no luck.
so my question is whether my hardware compatible with TinyOS 2.x.
The hardware specification I can see on the board:
MPR400CB
2003 CrossBow C29
with 900MHZ
Yes, it is compatible. But you need to tell TinyOS that you are using
a 900MHz radio, not a 433MHz radio (the default). If you search
through the archives there are a lot of messages on how to do this.
Phil
_______________________________________________
Tinyos-help mailing list
[email protected]
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
