I am trying to read serial data from pin 4 of the 10-pin header of the Tmote mini.
i have downloaded the Tmote TestUart0 example (Using the Shared UART0 for External Devices), and successfully loaded it onto my tmote. I used a oscilloscope on pin 4 to verify that data was outuput from the TX pin. Then, I built a cable from the 10-pin header to a PC RS-232 serial Port. The data received on the PC (using hyperterminal and serial sniffer to see hex values) is two bytes (0xDB, 0xFE) at 9600 bps. this is not what i expect since the example uses the following code... enum { UART_TX_BYTE = 0x12, }; ... UartControl.tx( UART_TX_BYTE ); ____________________________________________________________________________________ Looking for a deal? Find great prices on flights and hotels with Yahoo! FareChase. http://farechase.yahoo.com/ _______________________________________________ Tinyos-help mailing list Tinyos-help@Millennium.Berkeley.EDU https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help