Hi Nobody has the solution to this problem or simply a supposition to help me solving this serious issue ?
Thanks in advance jyves >Hello, >I have 2 mica2 platforms and mib520 programmer board. The purpose of my >application rather simple: I want to build a similar application to >OscilloscopeRF but with a higher conversion rate (250Hz from a single >sensor). (If it's possible it would be usefull to get the 500Hz rate. ) > >The problem I have is following: >->I have reduced the acquisition timer to 10ms. >->I have a waveform generator instead of the real sensor. >=> on the Oscilloscope java application, I recieve correct datas from 50Hz >down to 15Hz but from 15Hz to 0,2Hz(limit of my application) I have more >and more errors. I call errors data missing for instance I get only the >10% top of the sinewave at 0.2Hz? > >With the Osciloscope project (rather similar to oscilloscopeRF) It works >fine. >I don't understand where the bug is. If you have any idea it would be great >Thanks a lot >Jyves _______________________________________________ Tinyos-help mailing list Tinyos-help@Millennium.Berkeley.EDU https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
