Hi Janos, Thanks for the immediate help. It seems in Ubuntu, the Serial number 1 less than the COM number corresponded.
I tried "make micaz install mib510,/dev/ttyUSB0", and it finally worked. Thanks a lot! Jesseie On Fri, Apr 25, 2008 at 3:18 PM, Janos Sallai <[EMAIL PROTECTED]> wrote: > The fact that the MIB520 is visible as COM3+COM4 in windows does not > imply that it's /dev/ttyS2 when you boot Linux. > > > > After you plug in the programming, check dmesg to see what the character > devices that correspond to the MIB520 are. They are typically /dev/ttyUSB0 > and /dev/ttyUSB1. The former should be used to program the mote, the latter > to communicate with it. > > > > Janos > > > > *From:* [EMAIL PROTECTED] [mailto: > [EMAIL PROTECTED] *On Behalf Of *SS C > *Sent:* Friday, April 25, 2008 1:50 PM > *To:* tinyos-help > *Subject:* [Tinyos-help] MIB520 on TinyOS 1.x Ubuntu > > > > Hi all, > > I'm running tinyos 1.x on Ubuntu. Recently I'm trying to program my micaz > through MIB520. As the virtural com port for program is com3 on my laptop, I > used "make micaz install mib510,/dev/ttyS2" to download the Blink app, I got > the error: > > Programmer is not responding. > > If I use "make micaz install mib520,/dev/ttyS2", I'll get an error: > > /dev/parport0: No such file or directory > Failed to open ppdev. > > Does anyone here know what's going on? Thanks a lot! > > Jessie >
_______________________________________________ Tinyos-help mailing list Tinyos-help@millennium.berkeley.edu https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help