You can either go into your platform directory of choice and change the config file for DemoSensor, or else just throw the whole thing out and connect directly to the ADC channel you want to sample. Note that the demo Temp and Photo sensors also need to be enabled by turning on a PWx pin, so the their component modules do a bit more than just ADC sampling.
I haven't examined the MPS chip that closely but I think it includes an internal connection to an ADC channel to monitor it's supply voltage. The MPS manual is written in an entirely different dialect of gibberish from the ATMEGA and PIC ones that I'm used to, so I'm not sure. MS Ahmed Ebaid wrote: > Hey > I have a question regarding the Sense application, since the DemoSensor > component is a platform dependent, how can I change the configuration > file in order to sense temperature. also , what is the MCU-internal > voltage sensor do. > Thanks in Advance. > > -- > Ahmed > > > > > ------------------------------------------------------------------------ > > _______________________________________________ > Tinyos-help mailing list > [email protected] > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help -- Platform: WinXP/Cygwin TinyOS version: 1.x, Boomerang Programmer: MIB510 Device(s): Mica2, MicaZ, Tmote Sensor board: homebrew _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
