Hi Miklos! Miklos Maroti wrote: > Hi Andrey, > > I have added a RadioConfig interface through which you can change the > channel. You might need to power down the radio stack through > SplitControl if you want to avoid the rare cases when you cannot > change the channel because the stack is currently transmitting or > receiving messages. All interfaces are exported from > RF230ActiveMessageC. You need to download the latest CVS version.
Thanks a lot for the promptly answer and the update! I'll try it. Best wishes, Andrey > > On Tue, Jan 27, 2009 at 2:26 PM, Andrey Gursky <andrey.gur...@online.ua> > wrote: >> Hi! >> >> As of August, 2008 it was not yet possible to change the radio channel >> on IRIS dynamically: >> https://www.millennium.berkeley.edu/pipermail/tinyos-help/2008-August/035657.html >> >> In RF230LayerP.nc there are functions RadioState.setChannel(), >> changeChannel(). Does they have some issues and may not be used? >> >> --- >> >> I found only one suggestion to switch channels dynamically on MicaZ >> (CC2420 radio): >> http://mail.millennium.berkeley.edu/pipermail/tinyos-help/2006-December/021621.html >> and it is integrated in TinyOS. Is this a correct call sequence? >> CC2420Config.setChannel() >> CC2420Config.sync() >> >> >> Thanks in advance, >> Andrey >> _______________________________________________ >> Tinyos-help mailing list >> Tinyos-help@millennium.berkeley.edu >> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help >> > > _______________________________________________ Tinyos-help mailing list Tinyos-help@millennium.berkeley.edu https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help