Hi Janos, This worked for me once. But the second time I always get the following error:
/opt/tinyos-2.1.0/support/make/avr/mib510.extra:5: *** MIB510 must be defined, try "make iris help". Stop. Do you know why? David On Mon, Apr 27, 2009 at 7:57 AM, Janos Sallai <sal...@isis.vanderbilt.edu>wrote: > David, > > To compile for the iris mote, specify the iris target, i.e.: > > make iris > > To install the compiled image to an iris mote using the mib520 > programming board use > > make iris reinstall,17 mib520,/dev/ttyUSB0 > > assuming that you want the node id to be 17 and your mib520 shows up > on /dev/ttyUSB0 and /dev/ttyUSB1. On windows, you can use COMx, where > x is the lower port number associated with the programming board. > > To communicate with the mote, set the MOTECOM variable > > export MOTECOM=serial@/dev/ttyUSB1:iris > > (replace /dev/ttyUSB1 with the higher numbered port associated with the > mib520) > > Janos > > > On Sun, Apr 26, 2009 at 9:46 PM, David Li <w.david...@gmail.com> wrote: > > Hi, > > > > I have Iris motes from Xbow. I didn't see any instructions on the TinyOS > > Tutorial how to install compiled TinyOS images onto an Iris mote. Maybe > this > > has been discussed here before. Can someone explain? > > > > Also Xbow comes with a OTAP mechnisim in Moteworks to install their code > > Over-The-Air. But they only support TinyOS 1.1. Anyone know if it's > > feasible to customize the Moteworks to work with TinyOS2.1 while still > > keeping the OTAP capability? > > > > Thanks. > > > > David > > > > > > _______________________________________________ > > Tinyos-help mailing list > > Tinyos-help@millennium.berkeley.edu > > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help > > >
_______________________________________________ Tinyos-help mailing list Tinyos-help@millennium.berkeley.edu https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
