Hi, >> Therefore, is it possible that I use a tmote sky mote as basestation >> and then reprogram the micaz motes as clients in the network?
>I haven't tested this but it should work. I have tested it with TelosB and MICAz motes as TelosB base-station a long time ago. It works fine. Be sure to inject the image builded for MICAz (remote-mote) into the TelosB(base-station mote) flash. -- Mehmet Akif Antepli On Wed, Jan 13, 2010 at 9:08 AM, Razvan Musaloiu-E. <razv...@cs.jhu.edu>wrote: > Hi! > > On Tue, 12 Jan 2010, Vikram vik76 wrote: > > > Hello, > > I am trying to use Deluge T2 for MICAz motes. > > I use the command as per the Deluge T2 tutorial at > > http://docs.tinyos.net/index.php/Deluge_T2 > > > > ./burn mib510,/dev/ttyS0 serial@/dev/ttyS0:57600 micaz > > > > I get the following error during the Upload image process: > > > > =============================== Upload the image > =============================== > > Flushing the serial port... > > Checking if node is a Deluge T2 base station ... > > > > It hangs at this position of "Checking". > > > > I have connected the micaz mote using a programming board connected > > using a serial cable. > > > > Are you using the latest CVS? That's what I testes a few days ago and it > was working fine. > > > Note: The similar thing works for tmote sky motes when I change > > "micaz" to "telosb" in the burn command. > > Strange. Can you test if the serial communication works fine? > > > Therefore, is it possible that I use a tmote sky mote as basestation > > and then reprogram the micaz motes as clients in the network? > > I haven't tested this but it should work. > > -- > Razvan ME > _______________________________________________ > Tinyos-help mailing list > Tinyos-help@millennium.berkeley.edu > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help >
_______________________________________________ Tinyos-help mailing list Tinyos-help@millennium.berkeley.edu https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help