Hi everyone!
I need some help from anyone interest in TK154. I use the latest CVS version.
Telosb mote.
(*) I have 3 node topology n1 <-> n2 <-> n3. n3 transfer data to n1 via n2.( n1
is PAN Coordinator. n2 is Cluster head. n3 is sensor node)
- n1 starts the network with MLME_START.
- n2 starts the sub network with MLME_START.-> received data from n3 with
MCPS_DATA.indication -> MLME_SCAN -> synchronize to n1 with MLME_SYNC.request ->
send receiving data with MCPS_DATA.request -> start network again.
- n3 scan/track beacon with MLME_SCAN & MLME_SYNC.request -> join sub network
with MLME_ASSOCIATE.request -> MLME_ASSOCIATE.confirm=Success -> send data with
MCPS_DATA.request
(*) Now my n3 can transfer data to n1 via n2. But they didn't work well, I have
a problem with n2, in first period time (60 - 100 seconds) n2 ran ok, n2
received data from n3 and send to n1, then n2 fall into stuck state, it will
not run any function such as: received, send, start, scan... So I refer from
Berkeley forum about ResetC function and apply it to my code but n2 still not
reset. I must press reset button.
(*) I have some questions:
- Is there any stop function for MLME_START, MLME_SCAN...? how to handle them
and just call when I want and then stop to call another function.
- Is there any solution to get stuck status in NesC? it's mean when my mote
fall into stuck state, I can call reset function in this part.
I appreciate any answer or suggestion for me, this will help me much. Thanks in
advance.
With my best regard!
Dzung Vu Anh.
NGN LAB - Computer Engineering
AnDong National University - Andong si - South Korea
Tel: +82 54 -820 -7944
Mobile: 010-6427-1983
_________________________________________________________________
Hotmail: Trusted email with Microsoft’s powerful SPAM protection.
https://signup.live.com/signup.aspx?id=60969
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
